Protect Your Computer From Overheating With RAM Cooling Heatsinks
A heat sink or a heat spreader is an item that you insert in a computer to spread the heat of its operation evenly throughout the system. It provides a cooling effect that can keep your RAM from excessive thermal temperatures. Before buying one of these items for your computer RAM or CPU, it is essential to know more about how they disperse heat and air through your computer components.
Which types of RAM do these heat spreaders protect?
There are several types of RAM and CPU units that these heatsinks protect. The first type is DDR. DDR is the most basic type of random-access memory interface. They are usually available on laptops or older forms of desktop computer models.However, you can also protect a DDR and a DDR3 RAM interface with these heat spreaders. These RAM heatsinks are designed for the more difficult DDR2 and DDR3 types. It is important to remember, though, that they are not compatible with other models of cooling units.
Where do you insert heatsinks?
A heatsink is typically in multiple different locations. As a result, there are many places they can be installed or from which they can be removed. Just a few of these locations include the following:
- Near the CPU This location provides a cooling effect that improves the operation of your heatsink.
- By the RAM units Sometimes a heatsink is located near the random-access memory unit to improve its heat cooling capacity.
- By the fan The fan may run slowly and suffer from damage over a period. A heatsink located near them can minimize this effect on the CPU.
- Around the keyboard The keyboard can pick up a lot of thermal energy and may require cooling with a heat spreader to avoid serious problems.
Do they work at the same time as your fan?
The fan runs when the thermal energy in your computing model gets too high. It will then disperse that energy and make it less of a problem. Usually, it expels it through a vent somewhere on the outside. The heatsinks will help to minimize the need for regular fan operation by preventing excessive energy buildup.As a result, these two items form a powerful way to spread energy and avoid chip and motherboard damage. Therefore, when one of them fails, it is more likely that the other element will also fail because it will end up getting taxed cooling down the interior.
What sizes are available?
The size of these elements varies depending on where they are located. Most of the time, they are no more than an inch long and less than a half-inch wide. However, some smaller models can be placed throughout your model. Identifying one is relatively easy because they have short legs that hold them above the motherboard.