Defensas para Jeep Commander

Jeep Commander Fenders

A fender refers to the part of the Jeep vehicle that covers the wheel well. Theyre used to prevent debris from being tossed into the air by the tires. Fenders come in different styles to give your Jeep Commander a distinctive look.

Fender flares extend over the tire of your Jeep SUV. Flares are an extension on the fender that still conform to U.S. regulations. They also help protect your Jeep from flying debris or loose rocks that can damage the body.

Flat designs come in narrow and wide sizes. They can be installed like stock fenders but offer different choices for colors and designs. Fender flares can be added to the regular fender, but this is not required for installation.

Depending on the model of your Commander, stock fenders can be relatively easy to remove. Most are held in by pins in the front and screws in the rear. To remove the stock options, refer to an owners manual to see exactly where they are bolted in. You will need additional hardware to assist in their removal. Most stock options can be replaced as well in case they are damaged.

To trim your fender to fit it on the Jeep Commander, consider using a utility knife. To make a clean cut, score the plastic, and snap the material. This will assist in installing the part to ensure it fits properly.

Another option is to use a die grinder to assist in cutting the plastic. This will require either a battery-operated or cord-powered tool.

If you have a metal design, you might need to use an electric saw to assist with cutting the metal. To ensure safety, wear gloves and goggles to protect your eyes and hands.

To clean your fenders for your Jeep Commander, you will need a strong soap and lukewarm water. Grab a bucket or large container, and fill it with water. Next, squeeze liquid soap into the water. Most fenders can be cleaned while attached to the car. To clean, use a sponge or large rag to wipe them down. Hoses can also be used to help spray debris and mud off your Jeep vehicle. Once the fender has been scrubbed down, rinse it off with clean water. This is a gentle method for cleaning your Jeep Commander fenders.