Bombillas de luz LED Para Lincoln MKZ

LED Lights for Lincoln MKZ

Equip your Lincoln model with the most powerful illumination technology available by upgrading to LED lighting. LED lights are amazingly versatile and can be used in almost any vehicle lighting application. There is a nice collection of LED lighting options as upgrades for a luxury Lincoln MKZ or MKZ Hybrid.

Light-emitting diodes (LEDs) are advanced technology. LEDs provide strong light while hardly using any electricity. They do not get hot even after hours of use. They have a long, useful life. You could feasibly leave an LED light running for 50,000 hours before reaching the end of its rated life-expectancy.

Fog lights are one of the most common automotive applications of LED technology. Replacing the stock fog lights in your Lincoln sedan is easy and only requires a flat head screwdriver. Set aside about 15 minutes of labor for each side.

Follow these simple steps to install ultra-bright LED fog lights:

• Turn off the MKZ engine and start on one side.
• Use a flat head screwdriver to gently pry the fog light housing out of its socket.
• The fog light assembly will now be exposed. Depress the two plastic tabs on the top and bottom of the housing to release the light.
• Pull the old assembly a short distance away from your Lincoln and disconnect the electrical harness.
• Position the new LED assembly into place and connect the electrical harness.
• Push the LED assembly into the cavity until the clips connect.
• Replace the fog light housing.
• Repeat these steps for the opposite side to complete the installation.

Replacing the existing bulbs in your Lincoln’s headlights with LEDs is a simple way to increase the brightness and longevity of these critically important road illuminators. Though the benefits imparted by upgrading to LEDs are enormous, getting set up with this advanced lighting technology is almost as straightforward as an everyday bulb change.

Follow these easy steps to start experiencing the power of LED headlights in your Lincoln sedan:

• Pick a side to start with and turn the wheel so the tire is facing inward on the side you are working on.
• Turn off the engine and open the hood.
• Remove the screw from the panel in the wheel well to access the headlight assembly.
• Remove the rubber cover and turn the bulb housing counterclockwise to remove the bulb socket.
• Disconnect the wiring from the bulb socket.
• Follow the instructions that came with your LED headlights to connect the LED wiring to the exposed wiring coming out of the vehicle.
• Insert the LED bulb into the headlight assembly.
• Replace the cover.
• Install the wheel well panel.
• Repeat these steps for the opposite headlight to complete the installation.