Sistemas de limpiaparabrisas para Volkswagen Tiguan

Windshield Wiper Systems for Volkswagen Tiguan

Manufactured since 2007 by Volkswagen, the Tiguan is a compact crossover SUV model that is designed for spacious capacity and a sporty feel on the road. The windshield wiper system on a Volkswagen Tiguan helps to keep the windows clear of rain, snow, sleet, and other precipitation. When you need to replace or repair aspects of the windshield wiper system, you can find an array of replacement parts to restore your wipers to good working order.

The controls for a Volkswagen Tiguans windshield wipers are easy to use, and their control stalk is located on the right side of the steering wheel. The steps to control the wipers on this Volkswagen vehicle are as follows:

• Turn on the wipers: To set the wipers to intermittent use, push the control stalk up one notch. To make them swipe the windows only once, pull the stalk down.
• Adjust the frequency: If you want to change the frequency with which the blades swipe across the VWs windshield, use the toggle on top of the Volkswagen compact SUVs control stalk. Flipping it to the right speeds them up, and pushing it to the left slows the operation.
• Use windshield washer fluid: To use a flow of washer fluid to clean a stain or mark from the windshield, pull the Volkswagen Tiguans control stalk toward you to spark a flow of fluid.
• Use the rear wiper: Push the wiper control stalk away from you in order to turn on the rear windshield wiper. If you push it further back and hold it, you can release window washer fluid for the rear wiper.

Windshield wiper blades are one of the more commonly replaced parts of the wiper system. The blades wear out over time, and replacements are widely available with an array of options. You can easily replace windshield wiper blades at home on your VW Tiguan with no special tools or skills.

1. Disconnect the existing blade: On top of the Volkswagen SUVs wiper arm on the drivers side of the vehicle, you will see a small button. The blade is attached under the arm. By pushing the button, you will release the wiper blade.
2. Remove the blade: Slide the wiper blade off of the arm of the wiper. After the button is depressed, the blade should slide forward from the front of the arm.
3. Attach the adapter to the new blade: Place the adapter on top of the new blade and line up the "V" on both pieces. Slide together to snap into place.
4. Put the new blade in place: Push the wiper blade onto the arm, firmly but gently, as you slide it back. The blade will snap into place and the button will click through the hole in the arm.
5. Repeat for the passenger side: Youre ready to use your new wiper blades.